From f40343ba257b3ef619228d6cbae6d57c99bf85c0 Mon Sep 17 00:00:00 2001 From: j8takagi Date: Thu, 25 Oct 2012 13:24:04 +0900 Subject: [PATCH] =?utf8?q?Makefile=E3=82=92=E4=BF=AE=E6=AD=A3?= MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit 内部仕様書の生成手順を改善し、概要をdoc_inner/READMEに記載 トップディレクトリーのMakefileを整理 --- .gitignore | 3 +- Doxyfile | 363 ++++++++++++++++++++++++++++++------------- Makefile | 59 ++----- doc/Makefile | 2 +- doc_inner/.gitignore | 2 + doc_inner/Makefile | 34 ++++ doc_inner/README | 40 +++++ test/Makefile | 9 ++ 8 files changed, 363 insertions(+), 149 deletions(-) create mode 100644 doc_inner/.gitignore create mode 100644 doc_inner/Makefile create mode 100644 doc_inner/README create mode 100644 test/Makefile diff --git a/.gitignore b/.gitignore index 0780a99..4ded938 100644 --- a/.gitignore +++ b/.gitignore @@ -1,9 +1,10 @@ /casl2 /comet2 /dumpword -/doc_inner *.o *~ GPATH GRTAGS GTAGS +#* +core diff --git a/Doxyfile b/Doxyfile index 7971b95..5183d85 100644 --- a/Doxyfile +++ b/Doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.7.2 +# Doxyfile 1.8.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -22,8 +22,9 @@ DOXYFILE_ENCODING = UTF-8 -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. +# The PROJECT_NAME tag is a single word (or sequence of words) that should +# identify the project. Note that if you do not use Doxywizard you need +# to put quotes around the project name if it contains spaces. PROJECT_NAME = YACASL2 @@ -33,12 +34,25 @@ PROJECT_NAME = YACASL2 PROJECT_NUMBER = +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer +# a quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify an logo or icon that is +# included in the documentation. The maximum height of the logo should not +# exceed 55 pixels and the maximum width should not exceed 200 pixels. +# Doxygen will copy the logo to the output directory. + +PROJECT_LOGO = + # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) # base path where the generated documentation will be put. # If a relative path is entered, it will be relative to the location # where doxygen was started. If left blank the current directory will be used. -OUTPUT_DIRECTORY = doc_inner/doxygen +OUTPUT_DIRECTORY = doc_inner # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create # 4096 sub-directories (in 2 levels) under the output directory of each output @@ -57,7 +71,7 @@ CREATE_SUBDIRS = NO # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English # messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, -# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, # Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. OUTPUT_LANGUAGE = English @@ -112,7 +126,9 @@ FULL_PATH_NAMES = YES # only done if one of the specified strings matches the left-hand part of # the path. The tag can be used to show relative paths in the file list. # If left blank the directory from which doxygen is run is used as the -# path to strip. +# path to strip. Note that you specify absolute paths here, but also +# relative paths, which will be relative from the directory where doxygen is +# started. STRIP_FROM_PATH = @@ -181,6 +197,13 @@ TAB_SIZE = 4 ALIASES = +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding +# "class=itcl::class" will allow you to use the command class in the +# itcl::class meaning. + +TCL_SUBST = + # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C # sources only. Doxygen will then generate output that is more tailored for C. # For instance, some of the names that are used will be different. The list @@ -208,17 +231,34 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO # Doxygen selects the parser to use depending on the extension of the files it -# parses. With this tag you can assign which parser to use for a given extension. -# Doxygen has a built-in mapping, but you can override or extend it using this -# tag. The format is ext=language, where ext is a file extension, and language -# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C, -# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions -# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, +# and language is one of the parsers supported by doxygen: IDL, Java, +# Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, +# C++. For instance to make doxygen treat .inc files as Fortran files (default +# is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note +# that for custom extensions you also need to set FILE_PATTERNS otherwise the +# files are not read by doxygen. EXTENSION_MAPPING = +# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all +# comments according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you +# can mix doxygen, HTML, and XML commands with Markdown formatting. +# Disable only in case of backward compatibilities issues. + +MARKDOWN_SUPPORT = YES + +# When enabled doxygen tries to link words that correspond to documented classes, +# or namespaces to their corresponding documentation. Such a link can be +# prevented in individual cases by by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. + +AUTOLINK_SUPPORT = YES + # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should # set this tag to YES in order to let doxygen match functions declarations and @@ -239,12 +279,7 @@ CPP_CLI_SUPPORT = NO SIP_SUPPORT = NO -# For Microsoft's IDL there are propget and propput attributes to indicate getter -# and setter methods for a property. Setting this option to YES (the default) -# will make doxygen replace the get and set methods by a property in the -# documentation. This will only work if the methods are indeed getting or -# setting a simple type. If this is not the case, or you want to show the -# methods anyway, you should set this option to NO. +# For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES (the default) will make doxygen replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO. IDL_PROPERTY_SUPPORT = YES @@ -263,6 +298,22 @@ DISTRIBUTE_GROUP_DOC = NO SUBGROUPING = YES +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and +# unions are shown inside the group in which they are included (e.g. using +# @ingroup) instead of on a separate page (for HTML and Man pages) or +# section (for LaTeX and RTF). + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and +# unions with only public data fields will be shown inline in the documentation +# of the scope in which they are defined (i.e. file, namespace, or group +# documentation), provided this scope is documented. If set to NO (the default), +# structs, classes, and unions are shown on a separate page (for HTML and Man +# pages) or section (for LaTeX and RTF). + +INLINE_SIMPLE_STRUCTS = NO + # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum # is documented as struct, union, or enum with the name of the typedef. So # typedef struct TypeS {} TypeT, will appear in the documentation as a struct @@ -279,16 +330,27 @@ TYPEDEF_HIDES_STRUCT = NO # For small to medium size projects (<1000 input files) the default value is # probably good enough. For larger projects a too small cache size can cause # doxygen to be busy swapping symbols to and from disk most of the time -# causing a significant performance penality. +# causing a significant performance penalty. # If the system has enough physical memory increasing the cache will improve the # performance by keeping more symbols in memory. Note that the value works on # a logarithmic scale so increasing the size by one will roughly double the # memory usage. The cache size is given by this formula: # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, -# corresponding to a cache size of 2^16 = 65536 symbols +# corresponding to a cache size of 2^16 = 65536 symbols. SYMBOL_CACHE_SIZE = 0 +# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be +# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given +# their name and scope. Since this can be an expensive process and often the +# same symbol appear multiple times in the code, doxygen keeps a cache of +# pre-resolved symbols. If the cache is too small doxygen will become slower. +# If the cache is too large, memory is wasted. The cache size is given by this +# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols. + +LOOKUP_CACHE_SIZE = 0 + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- @@ -305,6 +367,11 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = NO +# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# scope will be included in the documentation. + +EXTRACT_PACKAGE = NO + # If the EXTRACT_STATIC tag is set to YES all static members of a file # will be included in the documentation. @@ -438,6 +505,15 @@ SORT_GROUP_NAMES = NO SORT_BY_SCOPE_NAME = NO +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to +# do proper type resolution of all parameters of a function it will reject a +# match between the prototype and the implementation of a member function even +# if there is only one candidate or it is obvious which candidate to choose +# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen +# will still accept a match between prototype and implementation in such cases. + +STRICT_PROTO_MATCHING = NO + # The GENERATE_TODOLIST tag can be used to enable (YES) or # disable (NO) the todo list. This list is created by putting \todo # commands in the documentation. @@ -483,12 +559,6 @@ MAX_INITIALIZER_LINES = 30 SHOW_USED_FILES = YES -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. The default is NO. - -SHOW_DIRECTORIES = NO - # Set the SHOW_FILES tag to NO to disable the generation of the Files page. # This will remove the Files entry from the Quick Index and from the # Folder Tree View (if specified). The default is YES. @@ -514,13 +584,23 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. LAYOUT_FILE = +# The CITE_BIB_FILES tag can be used to specify one or more bib files +# containing the references data. This must be a list of .bib files. The +# .bib extension is automatically appended if omitted. Using this command +# requires the bibtex tool to be installed. See also +# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style +# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this +# feature you need bibtex and perl available in the search path. + +CITE_BIB_FILES = + #--------------------------------------------------------------------------- # configuration options related to warning and progress messages #--------------------------------------------------------------------------- @@ -597,9 +677,10 @@ INPUT_ENCODING = UTF-8 # blank the following patterns are tested: # *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh # *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py -# *.f90 *.f *.vhd *.vhdl +# *.f90 *.f *.for *.vhd *.vhdl -FILE_PATTERNS = *.c *.h +FILE_PATTERNS = *.c \ + *.h # The RECURSIVE tag can be used to turn specify whether or not subdirectories # should be searched for input files as well. Possible values are YES and NO. @@ -607,14 +688,16 @@ FILE_PATTERNS = *.c *.h RECURSIVE = YES -# The EXCLUDE tag can be used to specify files and/or directories that should +# The EXCLUDE tag can be used to specify files and/or directories that should be # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. +# Note that relative paths are relative to the directory from which doxygen is +# run. EXCLUDE = -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or -# directories that are symbolic links (a Unix filesystem feature) are excluded +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded # from the input. EXCLUDE_SYMLINKS = NO @@ -678,8 +761,8 @@ INPUT_FILTER = # filter if there is a match. # The filters are a list of the form: # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER -# is applied to all files. +# info on how filters are used. If FILTER_PATTERNS is empty or if +# non of the patterns match the file name, INPUT_FILTER is applied. FILTER_PATTERNS = @@ -689,6 +772,14 @@ FILTER_PATTERNS = FILTER_SOURCE_FILES = NO +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) +# and it is also possible to disable source filtering for a specific pattern +# using *.ext= (so without naming a filter). This option only has effect when +# FILTER_SOURCE_FILES is enabled. + +FILTER_SOURCE_PATTERNS = + #--------------------------------------------------------------------------- # configuration options related to source browsing #--------------------------------------------------------------------------- @@ -707,7 +798,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -791,7 +882,14 @@ HTML_FILE_EXTENSION = .html # The HTML_HEADER tag can be used to specify a personal HTML header for # each generated HTML page. If it is left blank doxygen will generate a -# standard header. +# standard header. Note that when using a custom header you are responsible +# for the proper inclusion of any scripts and style sheets that doxygen +# needs, which is dependent on the configuration options used. +# It is advised to generate a default header using "doxygen -w html +# header.html footer.html stylesheet.css YourConfigFile" and then modify +# that header. Note that the header is subject to change so you typically +# have to redo this when upgrading to a newer version of doxygen or when +# changing the value of configuration settings such as GENERATE_TREEVIEW! HTML_HEADER = @@ -803,15 +901,34 @@ HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading # style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# stylesheet in the HTML output directory as well, or it will be erased! +# fine-tune the look of the HTML output. If left blank doxygen will +# generate a default style sheet. Note that it is recommended to use +# HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this +# tag will in the future become obsolete. HTML_STYLESHEET = +# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional +# user-defined cascading style sheet that is included after the standard +# style sheets created by doxygen. Using this option one can overrule +# certain style aspects. This is preferred over using HTML_STYLESHEET +# since it does not replace the standard style sheet and is therefor more +# robust against future updates. Doxygen will copy the style sheet file to +# the output directory. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that +# the files will be copied as-is; there are no commands or markers available. + +HTML_EXTRA_FILES = + # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. -# Doxygen will adjust the colors in the stylesheet and background images +# Doxygen will adjust the colors in the style sheet and background images # according to this color. Hue is specified as an angle on a colorwheel, # see http://en.wikipedia.org/wiki/Hue for more information. # For instance the value 0 represents red, 60 is yellow, 120 is green, @@ -841,20 +958,23 @@ HTML_COLORSTYLE_GAMMA = 80 HTML_TIMESTAMP = YES -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = NO +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of +# entries shown in the various tree structured indices initially; the user +# can expand and collapse entries dynamically later on. Doxygen will expand +# the tree to such a level that at most the specified number of entries are +# visible (unless a fully collapsed tree already exceeds this amount). +# So setting the number of entries 1 will produce a full collapsed tree by +# default. 0 is a special value representing an infinite number of entries +# and will result in a full expanded tree by default. + +HTML_INDEX_NUM_ENTRIES = 100 + # If the GENERATE_DOCSET tag is set to YES, additional index files # will be generated that can be used as input for Apple's Xcode 3 # integrated development environment, introduced with OSX 10.5 (Leopard). @@ -882,9 +1002,9 @@ DOCSET_FEEDNAME = "Doxygen generated docs" DOCSET_BUNDLE_ID = org.doxygen.Project -# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify -# the documentation publisher. This should be a reverse domain-name style -# string, e.g. com.mycompany.MyDocSet.documentation. +# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely +# identify the documentation publisher. This should be a reverse domain-name +# style string, e.g. com.mycompany.MyDocSet.documentation. DOCSET_PUBLISHER_ID = org.doxygen.Publisher @@ -1006,18 +1126,14 @@ GENERATE_ECLIPSEHELP = NO ECLIPSE_DOC_ID = org.doxygen.Project -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. +# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) +# at top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. Since the tabs have the same information as the +# navigation tree you can set this option to NO if you already set +# GENERATE_TREEVIEW to YES. DISABLE_INDEX = NO -# This tag can be used to set the number of enum values (range [0,1..20]) -# that doxygen will group on one line in the generated HTML documentation. -# Note that a value of 0 will completely suppress the enum values from appearing in the overview section. - -ENUM_VALUES_PER_LINE = 4 - # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # structure should be generated to display hierarchical information. # If the tag value is set to YES, a side panel will be generated @@ -1025,13 +1141,17 @@ ENUM_VALUES_PER_LINE = 4 # is generated for HTML Help). For this to work a browser that supports # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). # Windows users are probably better off using the HTML help feature. +# Since the tree basically has the same information as the tab index you +# could consider to set DISABLE_INDEX to NO when enabling this option. GENERATE_TREEVIEW = NO -# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, -# and Class Hierarchy pages using a tree view instead of an ordered list. +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values +# (range [0,1..20]) that doxygen will group on one line in the generated HTML +# documentation. Note that a value of 0 will completely suppress the enum +# values from appearing in the overview section. -USE_INLINE_TREES = NO +ENUM_VALUES_PER_LINE = 4 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # used to set the initial width (in pixels) of the frame in which the tree @@ -1064,7 +1184,7 @@ FORMULA_TRANSPARENT = YES # (see http://www.mathjax.org) which uses client side Javascript for the # rendering instead of using prerendered bitmaps. Use this if you do not # have LaTeX installed or if you want to formulas look prettier in the HTML -# output. When enabled you also need to install MathJax separately and +# output. When enabled you may also need to install MathJax separately and # configure the path to it using the MATHJAX_RELPATH option. USE_MATHJAX = NO @@ -1073,12 +1193,19 @@ USE_MATHJAX = NO # HTML output directory using the MATHJAX_RELPATH option. The destination # directory should contain the MathJax.js script. For instance, if the mathjax # directory is located at the same level as the HTML output directory, then -# MATHJAX_RELPATH should be ../mathjax. The default value points to the mathjax.org site, so you can quickly see the result without installing -# MathJax, but it is strongly recommended to install a local copy of MathJax -# before deployment. +# MATHJAX_RELPATH should be ../mathjax. The default value points to +# the MathJax Content Delivery Network so you can quickly see the result without +# installing MathJax. +# However, it is strongly recommended to install a local +# copy of MathJax from http://www.mathjax.org before deployment. MATHJAX_RELPATH = http://www.mathjax.org/mathjax +# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension +# names that should be enabled during MathJax rendering. + +MATHJAX_EXTENSIONS = + # When the SEARCHENGINE tag is enabled doxygen will generate a search box # for the HTML output. The underlying search engine uses javascript # and DHTML and should work on any modern browser. Note that when using @@ -1152,6 +1279,13 @@ EXTRA_PACKAGES = LATEX_HEADER = +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for +# the generated latex document. The footer should contain everything after +# the last chapter. If it is left blank doxygen will generate a +# standard footer. Notice: only use this tag if you know what you are doing! + +LATEX_FOOTER = + # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # is prepared for conversion to pdf (using ps2pdf). The pdf file will # contain links (just like the HTML output) instead of page references @@ -1185,6 +1319,12 @@ LATEX_HIDE_INDICES = NO LATEX_SOURCE_CODE = NO +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See +# http://en.wikipedia.org/wiki/BibTeX for more info. + +LATEX_BIB_STYLE = plain + #--------------------------------------------------------------------------- # configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1216,7 +1356,7 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's +# Load style sheet definitions from file. Syntax is similar to doxygen's # config file, i.e. a series of assignments. You only have to provide # replacements, missing definitions are set to their default value. @@ -1361,7 +1501,7 @@ MACRO_EXPANSION = NO EXPAND_ONLY_PREDEF = NO # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# in the INCLUDE_PATH (see below) will be search if a #include is found. +# pointed to by INCLUDE_PATH will be searched when a #include is found. SEARCH_INCLUDES = YES @@ -1391,15 +1531,15 @@ PREDEFINED = # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # this tag can be used to specify a list of macro names that should be expanded. # The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition. +# Use the PREDEFINED tag if you want to use a different macro definition that +# overrules the definition found in the source code. EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse -# the parser if not removed. +# doxygen's preprocessor will remove all references to function-like macros +# that are alone on a line, have an all uppercase name, and do not end with a +# semicolon, because these will confuse the parser if not removed. SKIP_FUNCTION_MACROS = YES @@ -1407,22 +1547,18 @@ SKIP_FUNCTION_MACROS = YES # Configuration::additions related to external references #--------------------------------------------------------------------------- -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: +# The TAGFILES option can be used to specify one or more tagfiles. For each +# tag file the location of the external documentation should be added. The +# format of a tag file without this location is as follows: # # TAGFILES = file1 file2 ... # Adding location for the tag files is done as follows: # # TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen -# is run, you must also specify the path to the tagfile here. +# where "loc1" and "loc2" can be relative or absolute paths +# or URLs. Note that each tag file must have a unique name (where the name does +# NOT include the path). If a tag file is not located in the directory in which +# doxygen is run, you must also specify the path to the tagfile here. TAGFILES = @@ -1490,14 +1626,12 @@ HAVE_DOT = YES DOT_NUM_THREADS = 0 -# By default doxygen will write a font called FreeSans.ttf to the output -# directory and reference it in all dot files that doxygen generates. This -# font does not include all possible unicode characters however, so when you need -# these (or just want a differently looking font) you can specify the font name -# using DOT_FONTNAME. You need need to make sure dot is able to find the font, -# which can be done by putting it in a standard location or by setting the -# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory -# containing the font. +# By default doxygen will use the Helvetica font for all dot files that +# doxygen generates. When you want a differently looking font you can specify +# the font name using DOT_FONTNAME. You need to make sure dot is able to find +# the font, which can be done by putting it in a standard location or by setting +# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. DOT_FONTNAME = FreeSans.ttf @@ -1506,17 +1640,16 @@ DOT_FONTNAME = FreeSans.ttf DOT_FONTSIZE = 10 -# By default doxygen will tell dot to use the output directory to look for the -# FreeSans.ttf font (which doxygen will put there itself). If you specify a -# different font using DOT_FONTNAME you can set the path where dot -# can find it using this tag. +# By default doxygen will tell dot to use the Helvetica font. +# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to +# set the path where dot can find it. DOT_FONTPATH = # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen # will generate a graph for each documented class showing the direct and # indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. +# CLASS_DIAGRAMS tag to NO. CLASS_GRAPH = YES @@ -1538,6 +1671,15 @@ GROUP_GRAPHS = YES UML_LOOK = YES +# If the UML_LOOK tag is enabled, the fields and methods are shown inside +# the class node. If there are many fields or methods and many nodes the +# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS +# threshold limits the number of items for each type to make the size more +# managable. Set this to 0 for no limit. Note that the threshold may be +# exceeded by 50% before the limit is enforced. + +UML_LIMIT_NUM_FIELDS = 10 + # If set to YES, the inheritance and collaboration graphs will show the # relations between templates and their instances. @@ -1578,7 +1720,7 @@ CALLER_GRAPH = YES GRAPHICAL_HIERARCHY = YES -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES # then doxygen will show the dependencies a directory has on other directories # in a graphical way. The dependency relations are determined by the #include # relations between the files in the directories. @@ -1586,11 +1728,22 @@ GRAPHICAL_HIERARCHY = YES DIRECTORY_GRAPH = YES # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif. -# If left blank png will be used. +# generated by dot. Possible values are svg, png, jpg, or gif. +# If left blank png will be used. If you choose svg you need to set +# HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible in IE 9+ (other browsers do not have this requirement). DOT_IMAGE_FORMAT = png +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# Note that this requires a modern browser other than Internet Explorer. +# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you +# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files +# visible. Older versions of IE do not have SVG support. + +INTERACTIVE_SVG = NO + # The tag DOT_PATH can be used to specify the path where the dot tool can be # found. If left blank, it is assumed the dot tool can be found in the path. diff --git a/Makefile b/Makefile index a84983c..bb304d1 100644 --- a/Makefile +++ b/Makefile @@ -1,64 +1,39 @@ -.PHONY: build check doc doxygen clean gtags htags clean_htags -MKDIR = mkdir -p -MV = mv -DOXYGEN = doxygen -GTAGS = gtags -HTAGS = htags -HTAGSFLAG = -anosx - -all: build gtags +.PHONY: all build gtags check doc doc_inner clean clean_cmd clean_gtags clean_src clean_test clean_doc clean_doc_inner +GTAGS ?= gtags +RMF ?= rm -f +all: build gtags doc build: $(MAKE) -C src +gtags: + @(which $(GTAGS) && $(GTAGS)) >/dev/null + check: @$(MAKE) -sC test/system doc: - @$(MAKE) -sC doc - -doxygen: doc_inner - @$(DOXYGEN) - -gtags: clean_gtags - @if test `which $(GTAGS)`; then $(GTAGS); fi - -htags: doc_inner - @$(MAKE) clean_htags - @$(MAKE) gtags - @$(HTAGS) $(HTAGSFLAG) $< - @$(MV) $/dev/null + +# htagsのHTMLドキュメント作成先は、 +# 引数DIRで指定されたディレクトリーの下のHTMLディレクトリー +$(GNU_GLOBAL_DIR): + @$(MAKE) -sC .. gtags + @($(WHICH) $(HTAGS) && $(CD) .. && $(HTAGS) -anosx doc_inner && $(CD) - && $(MV) HTML $@) >/dev/null + +clean: clean_doxygen clean_gnu_global + +clean_doxygen: + @$(RMRF) $(DOXYGEN_DIR) + +clean_gnu_global: + @$(RMRF) $(GNU_GLOBAL_DIR) diff --git a/doc_inner/README b/doc_inner/README new file mode 100644 index 0000000..e1052b1 --- /dev/null +++ b/doc_inner/README @@ -0,0 +1,40 @@ +このファイルは、YACASL2のdoc_innerディレクトリーに関するREADMEファイルです。 + +doc_innerディレクトリーには、YACASL2の内部仕様書が格納されます。 +YACASL2の内部仕様書は、DoxygenとGNU GLOBALの2種類があり、 +どちらもこのディレクトリーでmakeを実行することで生成できます。 + +DoxygenやGNU GLOBALがインストールされていないシステムでは、 +makeを実行しても内部仕様書は生成されません。 + +■Doxygen +Doxygenについては、下記URLを参照してください。 +http://www.doxygen.jp/ + +doc_inner/doxygenディレクトリーに、GNU Globalのdoxygenコマンドで +生成されるHTMLドキュメントが格納されます。 + +YACASL2でのDoxygenの設定ファイルは、YACASL2の +ルートディレクトリーにある「../Doxyfile」です。 + +■GNU GLOBAL +GNU GLOBALについては、下記URLを参照してください。 +http://www.gnu.org/software/global/ + +doc_inner/gnu_globalディレクトリーに、GNU Globalの +htagsコマンドで生成されるHTMLドキュメントが格納されます。 + +GNU Globalのgtagsコマンドで生成されるGTAGS、GRTAGS、GRPATHは、 +YACASL2のルートディレクトリー（..）に生成されます。 + +■内部仕様書の生成方法 +▼DoxygenとGNU Globalの両方を生成 +次のどちらか +$ make +$ make all + +▼Doxygen +$ make doxygen + +▼GNU Global +$ make gnu_global diff --git a/test/Makefile b/test/Makefile new file mode 100644 index 0000000..76b6c0e --- /dev/null +++ b/test/Makefile @@ -0,0 +1,9 @@ +clean: clean_systemtest clean_unittest + +clean_systemtest: + @$(MAKE) -sC system/casl2 clean + @$(MAKE) -sC system/comet2 clean + @$(MAKE) -sC system/dumpword clean + +clean_unittest: + @$(MAKE) -sC unit clean -- 2.18.0